Note: The immobiliser antenna is integral to the ignition switch and cannot be serviced separately.
Removal
1. Remove the rider's seat (see page 16-13).
2. Disconnect the battery, negative (black) lead first.
3. Remove the fuel tank (see page 10-91).
4. Remove the two screws and remove the ignition switch cover.
5. Without damaging the ignition switch and using a suitable drill, carefully drill out the head of the shear bolts securing the ignition switch to the frame.
1. Ignition switch and immobiliser antenna; 2. Shear bolts
6. Disconnect the ignition switch multiplug.
7. Noting the harness routing, remove ignition switch.
8. Remove the remainder of the shear bolt from the frame.
Installation
1. Installation is the reverse of removal, noting the following:
- Install new shear bolts and tighten until the heads shear off.