Removal
Note: The barometric pressure sensor is located on the battery tray, under the battery.
1. Remove the rider's seat (see page 16-13).
2. Remove the battery (see page 17-8)
3. Disconnect the multi-plug.
4. Release the fixing securing the sensor to the battery tray and remove the sensor.
1. Barometric pressure sensor; 2. Multi-plug; 3. Fixing
Installation
1. Fit the sensor to the battery tray, tightening the fixing to 1.5 Nm.
2. Reconnect the multi-plug.
3. Refit the battery (see page 17-8).
4. Refit the rider's seat (see page 16-13).