Fastener torque values (Harley Street 750)

0

Fastener torque values in this chapter

The table below lists torque values for all fasteners presented in this chapter.

FASTENER	TORQUE VALUE		NOTES
Alternator access cover screws	10.0-12.0 Nm	89-106 in·lbs	Alternator cover, Assemble
Alternator cover screws	10.0-12.0 Nm	89-106 in·lbs	Alternator cover, Install
Alternator stator screws	10.0-12.0 Nm	89-106 in·lbs	Alternator cover, Assemble
Baffle plate screw	3.0-5.0 Nm	27-44 in·lbs	Cylinder head covers, Assemble
Balancer bearing retainer screws	10.0-12.0 Nm	89-106 in·lbs	Removing and installing balancer, Install/Apply LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (blue).
Balancer shaft nut	160.0-170.0 Nm	118-126 ft·lbs	Removing and installing balancer, Install
Camshaft bolt	40.0-44.0 Nm	30-32 ft·lbs	Camshaft sprocket and timing chain, Install
Camshaft retainer plate screw	10.0-12.0 Nm	89-106 in·lbs	Rocker arms, Install
Cam sprocket bolt	40-44 Nm	29.5-32.4 lb·ft	Camshaft sprocket and timing chain, Camshaft Sprocket, Timing Chain and Cam Timing
Cam sprocket bolt	40-44 Nm	29.5-32.4 lb·ft	Camshaft sprocket and timing chain, Camshaft Sprocket, Timing Chain and Cam Timing
Cam sprocket bolt	40-44 Nm	29.5-32.4 lb·ft	Camshaft sprocket and timing chain, Camshaft Sprocket, Timing Chain and Cam Timing
Chain guide shoulder bolt	10-12 Nm	7.4-8.9 lb·ft	Camshaft sprocket and timing chain, Camshaft Sprocket, Timing Chain and Cam Timing
Chain guide shoulder bolt	10-12 Nm	7.4-8.9 lb·ft	Camshaft sprocket and timing chain, Camshaft Sprocket, Timing Chain and Cam Timing
Chain guide shoulder bolt	10-12 Nm	7 4-8.9 lb·ft	Camshaft sprocket and timing chain, Camshaft Sprocket, Timing Chain and Cam Timing
Clutch cover screws	10.0-12.0 Nm	89-106 in·lbs	Clutch cover, Install/See procedure for torque sequence.
Connecting rod screws (first torque)	19-23 Nm	14-16 ft·lbs	Crankshaft and connecting rods, Assemble/Lubricate threads with engine oil
Connecting rod screws (second torque)	85-95 degrees	85-95 degrees	Crankshaft and connecting rods, Assemble
Coolant sleeve screw	10.0-12.0 Nm	89-106 in·lbs	Removing and installing cylinders, Assemble
Crankcase M6 screws	10.0-12.0 Nm	89-106 in·lbs	Crankcase assembly, Assemble/See torque sequence in procedure.
Crankcase M8 screws	20.0-25.0 Nm	15-18 lb·ft	Crankcase assembly, Assemble/See torque sequence in procedure.
Crankshaft gear bolt	160.0-170.0 Nm	118-125 ft·lbs	Crankshaft gear, Install
Crankshaft position sensor screws	10.0-12.0 Nm	89-106 in·lbs	Alternator cover, Assemble
Cylinder head bolt	50.0-54.0 Nm	37-39 ft·lbs	Cylinder heads, Install/Apply ENGINE OIL to cylinder head bolt washers and threaded portion of the cylinder head bolts. See procedure for torque sequence.
Cylinder head cover bolt	10.0-12.0 Nm	89-106 in·lbs	Cylinder head covers, Install
Cylinder head flange bolt	20.0-25.0 Nm	15-18 ft·lbs	Cylinder heads, Install/Apply ENGINE OIL to threaded portion of the cylinder head flange bolts. See procedure for torque sequence.
Intake adapter screw	10.0-12.0 Nm	89-106 in·lbs	Intake adapter, Install
Lower front engine mount to engine screw	42.7-47.3 Nm	32-34 ft·lbs	Front engine mount, Install
Lower front engine mount to frame screw	22.0-29.0 Nm	17-21 ft·lbs	Front engine mount, Install
Oil filter adapter	20.0-25.0 Nm	15-18 ft·lbs	Oil pump, Install
Oil nozzle screw	10.0-12.0 Nm	89-106 in·lbs	Crankcase oil nozzles, Install/Apply LOCTITE 246 MEDIUM STRENGTH THREADLOCKER AND SEALANT (blue).
Oil passage plug	20.0-25.0 Nm	15-18 ft·lbs	Oil passage plugs, Install/See procedure to verify plug location.
Oil pressure switch	10.0-12.0 Nm	89-106 in·lbs	Oil passage plugs, Install
Oil pressure test port plug	10.0-12.0 Nm	89-106 in·lbs	Oil pressure, Oil Pressure Check
Oil pump housing screws	10.0-12.0 Nm	89-106 in·lbs	Oil pump, Install
Oil strainer cavity plug	20.0-25.0 Nm	15-18 ft·lbs	Oil passage plugs, Install
Oil strainer fasteners	10.0-12.0 Nm	89-106 in·lbs	Oil strainer, Install/Apply LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (blue).
Rear engine mount bolt, to engine	42.7-47.3 Nm	32-34 ft·lbs	Rear engine mount, Install
Rear engine mount screw, to frame	22.5-27.5 Nm	17-20 ft·lbs	Rear engine mount, Install
Restrictor plug	20.0-25.0 Nm	15-18 ft·lbs	Oil passage plugs, Install
Restrictor plug	20.0-25.0 Nm	15-18 ft·lbs	Oil passage plugs, Install
Shoulder bolt	10.0-12.0 Nm	89-106 in·lbs	Chain guide, Install
Spring holder bolt	10.0-12.0 Nm	89-106 in·lbs	Camshaft sprocket and timing chain, Install
Tensioner mounting bolts and spring tensioning bolt	10-12 Nm	7.4-8.9 lb·ft	Camshaft sprocket and timing chain, Camshaft Sprocket, Timing Chain and Cam Timing
Tensioner mounting bolts and spring tensioning bolt	10-12 Nm	7.4-8.9 lb·ft	Camshaft sprocket and timing chain, Camshaft Sprocket, Timing Chain and Cam Timing
Tensioner mounting bolts and spring tensioning bolt	10-12 Nm	7.4-8.9 lb·ft	Camshaft sprocket and timing chain, Camshaft Sprocket, Timing Chain and Cam Timing
Timing chain tensioner screw	10.0-12.0 Nm	89-106 in·lbs	Camshaft sprocket and timing chain, Install
Upper front engine mount screw, to engine	42.7-47.3 Nm	32-34 ft·lbs	Front engine mount, Install
Upper front engine mount screw, to frame	42.7-47.3 Nm	32-34 ft·lbs	Front engine mount, Install

See this article in russian language

Article about repair motorcycles «Harley Street 750/500» (2014-2021): «Fastener torque values»: https://motoinstruction.ru/en/Harley/Street/750/engine/repair/115991 <a href="https://motoinstruction.ru/en/Harley/Street/750/engine/repair/115991">Fastener torque values</a> - article about repair motorcycles «Harley Street 750/500» (2014-2021) from section «Engine repair». [url=https://motoinstruction.ru/en/Harley/Street/750/engine/repair/115991]Fastener torque values[/url] - article about repair motorcycles «Harley Street 750/500» (2014-2021) from section «Engine repair».